Food packaging manufacturing · OEM / ODM

Plastic Meat Trays for Fresh & Chilled Meat Packaging

Sourcing plastic meat trays for fresh beef, pork or poultry? Share your target tray size and sealing method. SOWINTOP can review suitable format options and OEM/ODM feasibility for your line.

For prepared meals, we can also review CPET food trays against your heating and closure requirements.

Material & size reviewOEM / ODM developmentGlobal B2B supply
01 / Product categories

Product Categories: Plastic Meat Trays & CPET Food Trays

Which format are you sourcing? Compare plastic meat trays for fresh and chilled meat, CPET food trays for selected prepared meals, and compatible lidding options below. Dedicated meat-tray and CPET model numbers are not currently listed in the public catalog, so availability and specifications require project confirmation.

01 / Fresh & chilled meat

Plastic Meat Trays

  • For fresh and chilled beef, pork and poultry
  • Review tray dimensions, portion weight, color and display conditions
Check Meat Tray Options
02 / Prepared meal packaging

CPET Food Trays

  • For selected prepared and oven-ready meals
  • Check heating profile, temperature limits and closure requirements
Review CPET Tray Suitability
03 / Lid & film compatibility

Lidding-Compatible Tray Formats

  • Review film structure and tray-flange compatibility
  • Check sealing settings against your packing line
  • Existing sushi tray is a format reference, not a confirmed meat-tray model
View Lidding Tray Example
04 / Custom project

OEM Custom Tray Development

  • Discuss custom dimensions and closure options
  • Confirm tooling scope, cost and development timing after reviewing your brief
Discuss Custom Tray Feasibility
Product availability: The public catalogue does not currently show a dedicated meat-tray or CPET SKU range. The images and adjacent food-container formats on this page are application references, not confirmation of a production-ready meat-tray model. SOWINTOP must confirm the exact model, material grade, dimensions, sealing compatibility and supply route for your project. You can also review the published plastic food container range.

Not sure which format fits your product? Tell us the food type and packing method.

Help Me Choose a Tray Format
02 / Materials & technical specifications

What Should You Confirm Before Ordering Plastic Meat Trays?

When comparing plastic meat trays, do not rely on outside dimensions alone. Check usable area, depth, material, unit weight and closure details before approving a sample.

Material comparison – application direction, not a finished meat-tray specification
MaterialPotential packaging directionBuyer considerationsMeat-tray status
PETClear display for selected chilled foods.Check rigidity, lid fit, sealing and storage conditions.Confirm the exact SKU and food-contact documents.
rPETRecycled-content option.Confirm percentage, traceability, performance and market requirements.Confirm grade, percentage and product suitability.
PPAlternative food-container material.Review stiffness, temperature and closure compatibility.Confirm the exact material grade and finished-pack tests.
CPETPrepared, frozen or oven-ready meal projects. SOWINTOP’s general material guide lists CPET for freezer-to-220°C ready-meal applications; this is not a confirmed meat-tray specification.Confirm the selected tray’s thermal limits, lid or film compatibility and user instructions before approval.Confirm meat-meal tray design and thermal test evidence.

Technical Details to Compare

Use the checklist below when comparing models. It separates information published for SOWINTOP's wider material platform from meat-tray specifications that still need confirmation.

Meat packaging tray specification checklist
SpecificationInformation requiredCurrent public data
Model / SKUApproved model code and drawing referenceMeat-specific SKU: to be confirmed
Dimensions & depthLength × width × height; internal usable dimensionsTo be confirmed per model
Material & thicknessPET / rPET / PP / CPET grade and sheet thicknessMaterial platform published; meat-tray grade and thickness unconfirmed
Unit weightGrams per tray and acceptable toleranceTo be confirmed per model
Closure / flangeLid code, film type, flange width and sealing methodMeat-tray compatibility and seal window unconfirmed
Carton packingPieces per carton, carton size and pallet quantityTo be confirmed per model
Important: General material temperature ranges are not a substitute for finished-tray testing. Cold-chain, freezer, oven, MAP, leak-resistance and sealing claims should only be published for models with matching test evidence.

Have a target size or drawing? Send it with your preferred material and closure so the model-specific details can be checked.

Review My Tray Specification
03 / Buyer applications

Where Will You Use Your Plastic Meat Trays?

Are you supplying supermarkets, running a meat-processing line or distributing chilled meals? The right tray checks depend on how your product is packed, displayed and transported.

Retail & supermarket

Fresh Meat Display

For plastic meat trays used in supermarkets and retail displays, check product visibility, shelf footprint, label position and space for an absorbent pad if required. Review a filled sample under the intended chilled-display conditions.

Food processing plants

Meat Processing & Sealing Lines

For processors, share your line type, target speed, film or lid structure and sealing settings. The tray flange and dimensions should be assessed with the actual equipment before approval.

Chilled & frozen distribution

Cold-Chain & Prepared Meals

For chilled distribution, define the minimum storage temperature, transit time, filled weight and stack height. For prepared meals, assess CPET food trays separately against the heating profile and finished-pack limits.

Tell us where you pack and sell. We can focus the tray review on the conditions that matter to your operation.

Match a Tray to My Application
04 / Compatibility & product selection

Will the Tray Work with Your Film, Pad & Cold Chain?

Plastic meat tray sealed with clear lidding film on a heat-sealing and modified-atmosphere packaging line.

Lidding Films, Heat Sealing & MAP

Send the film structure, flange dimensions, sealing temperature, pressure, dwell time and machine model. SOWINTOP's general OEM/ODM information references heat-seal and MAP applications, but meat-tray-specific seal settings are not published; validate the finished pack on your line.

Black plastic meat tray with fresh beef and a fitted absorbent pad for drip management.

Absorbent Pads & Drip Management

If you use an absorbent pad, provide its length, width, thickness and absorption target, along with the meat portion weight. Check pad fit and movement in a filled-tray trial.

Plastic meat trays arranged for refrigerated storage and cold-chain distribution.

Cold-Chain Handling & Stack Stability

Tell us the lowest storage temperature, transport duration, filled weight and stacking height. Request impact, compression or deformation evidence for the selected model rather than relying on a general material description.

Clear and black plastic meat trays displayed for fresh meat retail presentation.

Color & Retail Presentation

Choose clear, black or another available color after reviewing a sample. Check food visibility, label area and appearance under the lighting used at the point of sale.

Have a film, pad or packing-line specification? Send those details for a compatibility review.

Check Sealing & Cold-Chain Fit
05 / Global B2B sourcing

Selling into Different Markets? Confirm Requirements Before Production

Map highlighting North America

North America

For retail and processing buyers, check the food-contact documents applicable to the selected material, tray-to-film compatibility, label area and case-pack details.

Map highlighting Europe

Europe & UK

Confirm material traceability, product-specific food-contact declarations and evidence for any recycled-content or environmental claims required for your market.

Map highlighting the Middle East and Southeast Asia

Middle East & Southeast Asia

Check local import and food-contact requirements, carton dimensions, order mix and delivery schedule before confirming the supply plan.

Tell us the destination country before finalizing the material and document checklist.

Check My Market Requirements
06 / Procurement questions

Plastic Meat Trays & CPET Food Trays: Buyer Questions

Does SOWINTOP currently list standard plastic meat tray models?

A dedicated range of standard plastic meat trays is not currently shown in SOWINTOP's public catalog. This means the exact model, dimensions and availability need to be checked for each project rather than assumed from a general product photo.

  • Share your target tray dimensions, internal usable area and depth, or send a drawing or physical sample.
  • Tell us whether the tray is for fresh or chilled beef, pork, poultry, or a prepared meal.
  • Include your required material, color, lid or film type, order quantity and destination market.
  • SOWINTOP can then review whether an existing format is suitable or whether an OEM/ODM development discussion is needed.

A product image alone is not confirmation of a production-ready meat-tray model. Ask for the model code and approved specifications before placing an order.

What information should I provide to get the right meat tray recommendation?

The best starting point is your actual food product and packing process. Outside dimensions alone are not enough to confirm fit, filling capacity or line compatibility.

  • Food and portion: meat type, cut or presentation, target portion weight and whether an absorbent pad is used.
  • Tray dimensions: required length, width and height, internal usable dimensions, depth and preferred unit weight if known.
  • Packing method: snap-on lid, lidding film, heat sealing or MAP; include the film structure and sealing-machine details where applicable.
  • Storage and distribution: minimum storage temperature, transport duration, filled weight and expected stacking height.
  • Retail presentation: clear or dark tray preference, label position, product visibility and case-pack requirements.
  • Purchasing plan: target order quantity, repeat-order frequency, delivery destination and required delivery date.

If some details are not available yet, send the drawing, sample or the information you already have. The missing specifications can be identified during the project review.

Which material should I consider for fresh meat, chilled products or prepared meals?

PET, rPET, PP and CPET are referenced in SOWINTOP's wider material platform, but the suitable grade must be confirmed for the exact tray design, food-contact use and destination market.

  • PET: may be considered where clear product visibility is important for selected chilled-food displays. Check rigidity, closure fit, sealing and storage conditions.
  • rPET: may be considered when recycled content is part of the packaging brief. Confirm the recycled-content percentage, traceability, food-contact evidence and local market requirements.
  • PP: an alternative food-container material to assess when stiffness, temperature conditions and closure compatibility are key selection factors.
  • CPET: can be evaluated for selected prepared, frozen or oven-ready meal projects. Confirm the finished tray's temperature limits, heating profile, lid or film compatibility and test evidence.

Do not select a material by name alone. Ask for the exact grade, thickness, model specification and supporting documents for the intended application.

Can plastic meat trays be heat-sealed or used for MAP packaging?

Heat sealing and MAP may be considered as part of a packaging project, but compatibility depends on the tray, film, flange design and sealing equipment working together. Meat-tray-specific sealing settings are not currently published.

  • Tray details: model, material, flange width and sealing-surface design.
  • Film details: lidding-film structure and the film supplier's recommended sealing range.
  • Machine settings: sealing temperature, pressure, dwell time and machine model.
  • Pack requirements: the intended product, storage conditions and whether the project uses vacuum, gas flushing or another closure process.
  • Validation: run a trial on the actual packing line and check seal integrity and finished-pack performance before approving production.

SOWINTOP's general OEM/ODM information references heat-seal and MAP applications. This should not be treated as confirmation that every meat tray is compatible with every film or machine.

How do I check lid, lidding-film and absorbent-pad compatibility?

The tray should be assessed as a complete pack, not as a standalone container. A lid or film that does not match the flange, or a pad that shifts during handling, can affect the packing process and presentation.

  • For lids: compare the tray rim, lid profile, fit and closure method using the exact tray and lid samples.
  • For lidding film: confirm film structure, flange dimensions and the sealing window with the film supplier and packing-line operator.
  • For absorbent pads: provide pad length, width, thickness and absorption target, together with the meat portion weight.
  • For approval: conduct a filled-tray trial and check pad fit, movement, closure and appearance under the intended handling conditions.

Send the lid or film reference and pad specification with your tray drawing or sample so compatibility can be reviewed together.

What should I verify before using plastic meat trays in a cold chain?

A material description by itself does not prove that a finished tray will withstand your storage, transport and stacking conditions. The selected model should be assessed under the conditions it will actually encounter.

  • Minimum storage temperature and the temperature range during distribution.
  • Expected transit time and handling conditions between the packing site and destination.
  • Filled tray weight, carton configuration and stacking height.
  • Potential impact, compression or deformation during storage and transport.
  • Evidence or trial results for the selected tray model, rather than general claims about the material.

Provide the storage temperature, transit duration, filled weight and stacking plan when requesting a model review.

Can SOWINTOP customize tray dimensions, color and packaging details?

Custom dimensions and closure options can be discussed through an OEM/ODM project review. The scope, tooling requirements, cost and development schedule depend on the specific design brief.

  • Design: target length, width, depth, usable area, corner radius and flange details.
  • Material and appearance: preferred material grade, thickness, clear or dark color and product-visibility requirements.
  • Closure: compatible lid or lidding film, sealing method and label area.
  • Packing: pieces per carton, carton dimensions, pallet arrangement and destination requirements.
  • Project review: tooling scope, ownership or usage terms, sample approval criteria, cost and development timing.

Provide a drawing, reference sample or target dimensions first. Custom specifications and feasibility should be confirmed in writing before tooling or production begins.

What are the MOQ, sample process and production lead time for meat trays?

A confirmed meat-tray-specific MOQ, sample schedule and production lead time are not currently published. These details should be quoted against the selected model and project scope.

  • For an existing format, confirm model availability, material, current production status and the minimum order quantity for that SKU.
  • For a custom design, confirm whether new tooling is required and how tooling, sampling and approval affect the schedule.
  • Agree on the sample type, evaluation criteria and written approval process before mass production.
  • Share the target quantity, order mix, repeat-order plan, destination and required delivery date to obtain a realistic supply schedule.

Do not rely on a general company lead-time reference as a guaranteed schedule for an unconfirmed meat-tray model. Request a project-specific quotation and delivery plan.

Which food-contact documents should I request for my destination market?

SOWINTOP's public materials reference FDA 21 CFR and EU Regulation 10/2011 requirements. The applicable evidence must still be checked for the exact material, finished product, production site and destination market.

  • North America: identify the relevant FDA food-contact requirements for the selected material and intended conditions of use.
  • Europe and the UK: request the applicable food-contact declaration and supporting evidence for the selected material and product.
  • Recycled-content projects: confirm the recycled-content percentage, traceability and any evidence needed to support environmental or recycled-content claims.
  • All markets: check that the document identifies the correct material or SKU, production site, intended food type and conditions of use.

Tell SOWINTOP the destination country and selected material before requesting the document package. A general reference to a regulation is not a substitute for current, product-specific compliance evidence.

Still deciding between formats or materials? Send the details you have and we will identify the next point to confirm.

Ask About My Tray Project